| Serial No. | Parameter | Description |
| 1 |
Material |
Zinc Alloy/Steel |
| 2 | Panel Material |
Aluminum alloy |
| 3 | Surface finish |
Electroplated/Painted/Power sprayed |
| 4 | Panel Dimension(mm) |
170*123 |
| 5 | Cutout(mm) |
148*115 |
| 6 | Height of product(mm) |
97.6 |
| 7 | Bottom box size(mm) |
146*113*97.6 |
| 8 | Bottom box material |
Plastic |
| 9 | Capacity of modules /Interface size |
4 ways 45*45mm modules |
| 10 | Configuration |
Power outlet+Data outlet or USB charging : Customized as required |
| 11 | Cable length |
1.5m, 2m,2m or required length |
| 12 |
Available modules |
45*45mm Type series |
Application:
1.Feature of Safewire pop up desksocket :
1. 6 ways ,4 ways,45*45mm power Socket & Data
2.Black/White/Silver/Gold/Graphite/Nicket chrane etc.
3.2 bridge empty enclosure or complete socket with plug cable.
2.Advantage of Safewire pop up desksocket :
Table socket / power socket/service outlet office socket/furniture socket table power outlet/pop up socket/hotel socket/table recess console/power dock table mounts socket
1.IP44,Aluminum alloy plate + UL94 PC fire retardant box , More higher insulation,more safety.
2.45mm snap-in socket+ 2 bridge support + screw fixing box,Easy Installation& replacement save labor cost.
3.45 degree/180 degree plug with socket + IP44 pop up 45mm socket with shutter,more best plug.
3.Specification of Safewire pop up desksocket:
A)Product dimension:
B)45*45mm modules&socket:
Installation Process
- Cut out as specification sheet.
- put the bottom box into cut-out hole,punch the self-tapping screw and fix the bottom box.
- Remove plastic frame fixing socket modules.Assembly the socket or data Jack into the plastic frame and press frame ensure them combine tightly.
- Keep socket modules connected by inner wire (it should be copper core 1.5mm29~20 wire and length should be suitable).Then earthing and ensure inner wire tightly with modules.For fast connector terminal block,Just insert wire into block.
- Phone line ,TV receiving line sound box wire（it should thin wire）Just the wire length and tighten stop screw comathen.
- Put the panel on the bottom box and it with the hole.
Attentions:
1.Prevent from corrosive liquid, gas (strong acid, strong alkali, paint)and humidity.
2. All dimension quoted are nominal only. Drawings , images and text are for illustrative perposes only and product details and dimension are subject to change without notice.
Safety Warning:
1)This is a class I product and must be earthed
2)This product must be installed/wired by a qualified electrician
3)before installation/maintnance ,ensure the mains supply is switched off and the circuit fuses are removed or circuit breakers switch off
4)For indoor use only
1.With damping device, press button and pop up with slow speed;
2.With screws and complete plastic bottom box,more easy to installation;
3.The panel is by aluminum alloy of integrate diecasting structure, more reliable surface protect from scratch ;
4.Silver or black painting finish of optional surface .
Available for 45*45mm type international sockets or modules types:
