factory Outlets for Male Electrical Wall Socket - HTD-307AL – Safewire Electric

Technical parameters & characteristic :

1) Working environment:

1. The environment temperature:-5℃~/40℃
2. The rated voltage：100V~~250V
3. Rated current：10A、13A、16A、20A

2) Characteristic:

3) Technical parameters :

Application:

l Office and education

l Industry and Engineering

l Presentation and retail;

l Orientation and safety;

l Transit areas and parking;

l Hotels, hospitality and wellness;

l Health, sport and leisure;

l Art and culture;

Installation instructions:

1. Remove the panel from the bottom box along with the electrical modules.
2. Fix the flooring with spare screws on the bottom box and place it in the embedded hole.
3. The flooring surface shall be at least level with the ground or 20mm below the ground.
4. Remove flooring surface ,Insert the 10–12mm lead head into the terminal of floor box.
5. Fix the panel to the bottom box with screws.

Attentions:

1. Dispose of trash in bottom box and prevent dirt and debris from entering inside.
2. 2.The sealing ring is closely attached to the smooth surface to prevent water leakage.
3. 3.Prevent from alkaline corrosion and humidity.
4. 4.When installing, pay attention to the opening direction,the length of the conductor to the bottom box shall not exceed 10cm,Set aside at least 200mm of cable.
5. 5.When installing and wiring,Product should avoid direct contact with corrosive liquid, gas (strong acid, strong alkali, paint).
6. This product is suitable for dry surface treatment, avoid water flush and immersion, and ensure its insulation
7. Avoid acid alkaline solution flushing,avoid scratch of transparent protective paint,ensure corrosion resistance.

Package

Method of use:

Gently press the outlet with your hand and lift the lid ,the lid will open along with it to reveal the function keys inside.(Another way is to open the lid directly to expose the functional module).

Product Show: 

1. The lid was opened at 90 degrees : When using, open the cover horizontally of 90 degrees to the floor to avoid accident potential and product damage caused by cover erection.
2. Side-mounting: Outlet bracket for side-mounting for 86 type switch board
3. The outlet way of the line can be chosen,DK type cable exit or HK type cable exit： DK:Single direction outlet.HK:Dual direction outlet.

1. More Strong Scratch Resistance: Material made from high quality H62 Brass and stainless 304,Automatic polish robot and painting machine to ensure reliable quality.
2. Good sealing：With temporary lid-secure to body during pour to prevent ingress of slurry.
3. Power-coated steel box has 10*25mm conduit and diameter of 27mm diameter knock-outs available to accommodate CAT 6A cabling available on request.

HTD-307AL Outline drawing:

Available sockets or modules types: